Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Prices
  • Show Fewer Prices
  • Show More Sizes
  • Show Fewer Sizes

Pro Bikes Catalog

Zipp 303 Firecrest Carbon Disc Brake Rear Wheel (Clincher)
$1,300.00
Zipp makes the impossible possible with their 303 Firecrest Carbon Disc Brake wheels—they're equally at home on the flats as they are in the mountains. The 45mm-deep rims slice through the wind more efficiently than even many deep-section wheels thanks to their 28.5mm-wide dimpled rims. And, by creating a seamless junction between rim and tire, the increased width further reduces drag. The 303s climb with the best and re-accelerate out of corners like rockets since they barely register on the scale, which makes them a must-have on undulating terrain. The extra wide rim also allows running wider tires at lower pressures with less fear of pinch flatting, which boosts ride quality and comfort and reduces rolling resistance. Plus, Zipp's 77D/177D disc hubs gives you incredible stopping power in wet and dry conditions alike, and they're thru-axle compatible (sold separately) for jaw-dropping steering precision and power transfer. You also get Sapim's oustanding CX-Ray spokes.
Stan's NoTubes All Mountain 29er Tubeless Kit
$75.00
Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's All Mountain 29er Tubeless Kit converts standard tubed wheels to tubeless so you can reap the benefits. Everything you need to go tubeless is included. Plus, you won't miss dealing with flat tires and you'll save money on tubes!
DT Swiss 240s Straightpull Road Front Hub
$169.00
The DT Swiss 240s Straightpull road hub hits the sweet spot between light weight and reliability. The straight pull spoke design makes for a stiff, responsive wheel that will roll for thousands of nearly frictionless miles.
Origin8 RD1100 Rear Road Hub (11-speed Shimano/SRAM)
$79.99
• Machined and forged alloy construction • Sealed cartridge bearings • Lightweight design • 8/11-speed Shimano/SRAM cassette compatibility • 20, 24, 28, 32, 36-hole spoke drilling • Quick release • 130mm hub spacing • Black or silver
Origin8 RD1100 Front Road Hub
$59.99
• Aluminum hub body • Quick release • 100mm OLD • 20, 24, 28, 32, and 36-hole spoke drilling • Black or Silver
Origin8 SS1101 Rear Fix/Freewheel Single-Speed Hub
$53.99
• Sealed cartridge bearings • High flange design • 120mm hub spacing • Aluminum hub body • Lightweight, hollow, heat-treated axle • Fix/freewheel hub threading • 32 and 26-hole spoke drilling • Bolt-on 3/8-inch axle • Black, silver, or white
Hope Pro 2 & Pro 2 Evo 15mm Thru Axle Conversion Caps
$50.00
Hope Front Axle Conversion Kits · Compatible with Pro 2 and Pro 2 Evo hubs · Converts all Hope Pro 2 and Pro 2 Evo hubs to 15mm through axle hubs
Origin8 SS1101 Front Hub
$51.99
Sealed cartridge bearing High flange design w/cut outs 100mm OLD Lightweight, hollow, heat-treated axle Black, silver, or white 32 or 36-hole spoke drilling
Stan's NoTubes Standard Rim Strip
$27.50
Stan's Standard Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Shimano Deore XT M756A 10-Speed 6-Bolt Disc Rear Hub
$69.99
Shimano XT FH-M756 Series Rear Hub - Double contact bearing seals - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-Bolt rotor mount - Bearing Type: Loose Ball - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Center to Flange, Left: 33.5 - Center to Flange, Right: 20.5 - Flange Diameter Left: 61 - Flange Diameter Right: 61 - Hub Drilling: 32 - Hub/Brake Compatibility: 6-Bolt Disc - Rear Axle: QR x 135mm - Skewer Included: Yes - Spoke Interface: J-Bend - Weight: 495 grams
WTB Frequency TCS i23 Rim (29-inch)
$80.00
WTB's Frequency TCS i23 Rim is an all-mountain rider's dream. Its svelte weight is perfect for spinning up steep climbs and its 23mm width is ideally suited to meaty trail tires. It's made of 7000-series aluminum with WTB's legendary I-Beam reinforcement and 4D drilling for awesome lateral and torsional strength and durability. And, the Frequency utilizes WTB's Tubeless Compatible System which means with their tubeless-ready rim strip (sold separately), you can run a tubeless-compatible tire for easy conversions, minimal weight and maximum traction out on the trail.
GSport Birdcage Rim
$79.99
Someone said a few years ago that there was nothing new left to do with BMX rims, yet since then GSport has gone on to do quite a lot of new stuff, and here’s an example of the latest. At first glance the Birdcage looks like a fairly conventional “aero” style rim, but there is more to it than that. The first clue comes from the name; birds have hollow bones to save weight whilst retaining as much strength as possible, and the Birdcage rim has a hollow bead for the same reason. The rim’s hollow bead is still big and chunky to help reduce the chances of pinch puncturing or flat spotting the rim, but by creating a tiny hollow cavity inside it GSport can also keep the weight right down. The next innovation was to adapt their cross-lacing design to the narrow inner wall of the rim. They managed to squeeze a few extra millimeters of spoke offset out of the design to help increase lateral wheel strength, and by carefully tailoring the rim’s cross-section we managed to match all the angles to the nipple so that the walls of the rim section act like the ribs inside the Ribcage rim, which helps to support the spoke nipples as much as possible. Traditionally, the greatest flaw in “aero” rims has been the valve hole. “Aero” rims position a lot of very efficiently utilized mass in the base of the rim to support the spokes and give the rim good strength, then a huge hole is drilled through it for the valve stem and a massive weak-spot is created. With the Birdcage GSport has offset the valve hole so that this section can retain its strength. A handy side-effect of this is that fitting a pump is now more convenient. Aside from these original features, GSport spent a lot of time “sweating the small stuff”. They’ve ensured that the deep center allows for easy tire removal and fitting, and they've made sure that the sidewalls, while slimmed down, are still suitable for brake use. The end result is one of their most high tech rims to date. With a weight of just 408g (14.4oz) it outperforms most rims weighing 20-30% more, and the weight saving from the rotational mass of the wheel feels fantastic. TECHNICAL SPECIFICATIONS - Sizes: 20" Only - Drillings: 36 hole - Weight: 408g / 14.4oz - Width: 34mm ERD: 383mm
Stan's NoTubes 3.30HD Shimano/SRAM Steel Freehub Body (9/10-speed)
$74.00
Replacement Shimano/SRAM steel freehub body for Stan's NoTubes 3.30HD rear hubs.
Hope Pro 2 Evo SRAM XD Driver
$97.00
Hope XD-11 Freehub Bodies · For XD 11-speed cassette · For Hope Pro 2 EVO hubs · Contains drive side end cap, bearings and driver
Sunlite Quick Release Skewer (Rear, 168mm)
$11.99
• Replacement aluminum quick release skewers
Origin8 FB-1110 Elite Fat Bike Skewers
$19.99 - $29.99
Elite Series skewers for fat bike applications AL6061 alloy lever with CrMo axle Available for 135mm, 150mm, 170mm, and 190mm OLD spacing
Origin8 Pro Pulsion Rim Strips
$4.59
Origin-8's Pro Pulsion Rim Strips are made from a super-durable, environmentally friendly PVC material.
Stan's NoTubes ZTR Iron Cross Rim (700c)
$88.00
Stan's Iron Cross Rims are their answer to the mud and madness that is cyclocross. Stan's renowned tubeless system and Bead Seat Technology provides lower tire pressures, increases tire volume, and delivers superior cornering traction. These super low-profile, disc-only rims feature a semi-aero profile and low weight to help you sprint out of the corners and gap the pack.
GSport Ribcage Rim
$89.99
The Ribcage has been one of the only rims to have true design breakthroughs in the last few years, since its introduction the competition has scrambled to catch up but still remain a poor copy, so if it doesnt say G-Sport on the rim, don't expect it to perform like a G-Sport rim. The Ribcage is a light weight rim that can take anything you throw at it. With the ribcage the spoke holes are re-enforced with patented ribs that support the sides of each spoke nipple and eliminate the possibility of nipple pull through under even the highest loads. The rim also features cross-over-spoke lacing, where each spoke goes from one side of the hub to the opposite side of the rim for an increased angle and therefore increased lateral strength. The outer walls are extra thick to protect against case dents, while the other walls are extra thin to keep it light. The entire design revolves around the use of a proprietary high strength aluminum alloy made specially for us in an on-site foundry . At 500 grams, the strength to weight ratio of the Ribcage cannot be matched. The 36mm width and 18mm height are also major factors in the design, spreading out the impacts and maximizing resistance to pinch puncturing. GSport offers rims in HARD anodized finishes rather than the decorative anodizing used by most companies. All of these advantages create the premier rim, but do effect the cost. TECHNICAL SPECIFICATIONS - Sizes: 20" Only - Drillings: 36 and 48 - Weight (Hard Anodised): 500g /17.6oz - Weight (Chrome Plate): 540g / 19oz - Width: 36mm ERD: 389
Crank Brothers Front Axle and Endcap Kit
$19.99
Front axle and endcap kits for all non-boost 2017 cobalt, iodine, and zinc wheels. Use this front axle and endcap kit to convert any non-boost 2017 cobalt, iodine, or zinc wheel to the size selected below.
Origin8 MT-1110 Elite MTB Boost Rear Hub
$199.99
- Elite Series convertible MTB hubs - Available in multiple axle configurations - Shimano and XD cassette body options with 6 pawl/54 point/6.6-degree engagement - Straight pull and J-bend spoke options - 6 bolt disc brake rotor compatible - Sealed bearings - Material: AL6061 - Color: Blk - Brake Type: 6B - PCD-L: 58mm - PCD-R: 58mm - LTF-L: 37.71mm - LTF-R: 50.81mm - CTF-L: 36.44mm - CTF-R: 23.34mm
Roval Boost Conversion Kit
$55.00
Convert Roval wheels with 142 or 142+ to be used with Boost spacing (110 /148mm) suspension forks and frames. - Kits include front and rear hub end caps, rotor spacers, and kit specific rotor bolts - Compatible with select MY13-16 Roval Wheels. Choose the appropriate SKU for each wheelset - Each conversion kit requires the existing rear wheel to be re-dished to center. Consult an authorized dealer to perform this operation
Campagnolo Zonda Disc Brake Wheelset
$920.00
Campagnolo Zonda Disc Wheels are a benchmark for all aluminum disc brake wheelsets. It features a completely redesigned structure specific to bicycles with disc brakes. The result is all-round improved reactivity, especially thanks to the asymmetrical rims and Mega G3 hubs on both wheels. This innovative solution provides a stable front wheel that is able to absorb energy from the braking torque generated on the left-hand side and a rear wheel that guarantees maximum power transfer from the cyclist. - Compatible with HH12, QR and 135 and 142 rear hubs. - 6 screws and AFS to ensure full compatibility with every disc available on the market. - The front wheel also features G3 technology for top performance even during very powerful braking.
DT Swiss Prolock Hexhead Alloy Nipples
$51.90
- ProLock: pre-prepped/treated nipple threads with special compound - Hexhead (14g only) design for building/truing at nipple head, in addition to 4-sided flats at rim protrusion - Form-A design assures smooth fit and build - Cold-forged nipple blank machined to DIN 79012 specs - 14mm overall length (2mm taller hexhead for wrench interface, but protrusion through rim is the same as a 12mm DT nipple) - 2.0mm (14g) spoke thread interface with full run-through - Made in Switzerland. - Box/100
Race Face Next R 27.5-inch Front Wheel
$724.99
Race Face's first carbon wheelset comes to market during peak enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction. 2 year no fault guarantee HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster needed - Wider bearing stance 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Independently sprung pawls - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - Full carbon fiber construction - 31mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - High gloss black water transfer logos
Race Face Next R 29-inch Rear Wheel
$774.99
Race Face's first carbon wheelset comes to market during Peak Enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life, and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction. 2 Year No Fault Guarantee HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster needed - Wider bearing stance 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Independently sprung pawls - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - Full carbon fiber construction - 31mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - High gloss black water transfer logos
Race Face Turbine/Aeffect End Cap Set
$22.99 - $28.99
Axle conversion kits for Race Face Turbine/Aeffect hubs. - Select from front or rear applications
Stan's NoTubes Crest MK3 Rims
$100.00
Wider and even lower in profile, the new Crest MK3 sheds weight for faster acceleration and climbing. WideRight 23mm internal width increases tire volume for improved stability with wider tires. Inspired by carbon technology, the entirely new rim shape adds strength and virtually eliminates the chance of a pinch flat. Refined over the past 15 years, Bead Socket Technology offers the most trusted tubeless seal in the business, making the Crest MK3 the best choice for lightweight, tubeless XC performance. - 23mm internal rim width for more stability with larger tires - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Laterally stiffer and stronger for improved handling Wider but even lighter than the original Crest - More durable rim shape and alloy Most trusted tubeless system for easy setup and low maintenance - Legendary Crest climbing and speed in a high volume rim - WideRight optimized for XC tires
WTB Scraper 27.5-inch
$129.95
Legendary tubeless technology has now been hand delivered to the plus-sized market. Why have a 2.8+ inch tire if you can’t experience a lovely tubeless ride? The Scraper rim features a TCS inner rim profile, 4D angled drilling, and WTB's light but stiff WT69 Alloy, all while still allowing for popular and available J-bend spokes. Yep, non-proprietary spokes but a high tech rim. The Scraper i40 is designed for 2.8" tires while the i45 is optimized for 3.0" tires. Experience TCS euphoria with WTB's Scraper rim and understand what this plus-sized grinning is all about. - Usage: Adventure/Plus Sized Tires/Bikepacking
DT Swiss 240s Straightpull MTB Center Lock Rear Hub
$369.00
The DT Swiss 240s Straightpull Center Lock hub hits the sweet spot between light weight and reliability. The straigh tpull spoke design makes for a stiff, responsive mountain bike wheel that will roll for thousands of nearly frictionless miles. Plus, DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals. And the Center Lock rotor attachment makes installing and removing rotors fast and simple.
Page 1 of 39 Next page